SENSOMAT BED is a 760mm x 250mm pressure pad that is activated by the weight of a person in bed. The sensor pad is installed in the bed, under the mattress protector on top of mattress. An alarm is activated when the individual attempts to leave the bed.

Typically the mat is placed under the weight of the individual's buttocks. A change in pressure is identified as the person moves from their bed in any direction. This information is detected by the control unit supplied with the SENSOMAT BED which gives an audible and visible alarm. The controller also provides an output to connect to an existing emergency or nurse call system.

If an existing call bell system is not available, the controller may be used as a stand alone device to provide a local alarm or a SENSOTROL WIRELESS may be used to indicate an alarm. SENSOTROL WIRELESS is a small wireless alarm controller that the SENSOMAT BED controller plugs into. This small controller alerts staff within a 50m radius via an audible alarm when the system is activated.

The SENSOMAT BED is available in several kit forms for different applications. Extension and adaptor leads are available to enable the alarm controller to be used on most existing nurse call systems.

The SENSOMAT BED should always be stored flat and never folded or rolled. The SENSOMAT may be wiped clean with a damp cloth. Do not immerse in water. Not suitable for use with incontinent patients.

Kit Contains:
Sensomat Bed Pad
Sensomat Controller
Sensomat Lead
Sensomat Power Pack